Get in touch.

Say hello

T: +44 (0)1298 812371
F: +44 (0)1298 812237
E: [email protected]

Find us

HD Sharman Ltd.
High Peak Works,
High Peak,
Derbyshire SK23 0HW

Turnback method (minimum 70mm overhang) – if the flashing cannot be removed

  • Fit liner up the front of the existing eaves cover flashing
  • Return the liner onto the underside of the roof sheet ensuring there is a minimum further 70mm overhang
  • Fit new once bent flashing to mechanically fix the liner to the underside of the roof sheet using Sharmans fixings

Note: Although this method will solve leaks in the gutter, there is a risk that any water that penetrates the top sheet could ingress behind the liner. Every effort should be made to achieve option 1.

Image placeholder
Zoom in Zoom out