Get in touch.

Say hello

T: +44 (0)1298 812371
F: +44 (0)1298 812237
E: [email protected]

Find us

HD Sharman Ltd.
High Peak Works,
High Peak,
Derbyshire SK23 0HW

Option 1 – Where the insulation is flush with the gutter edge

** Ensure the roof sheet overhangs the insulation by 70mm further than the finished edge of the gutter liner to prevent capillary action **

** This method can also be used if the insulation overhangs the gutter by 40mm or less **

  • Fit the liner to the full profile of the gutter
  • Turn back the liner onto the underside of the roof sheet
  • Using Sharmans fixings, mechanically fix a 30mm x 30mm galvanised angle flashing at 500mm centres


Image placeholder
Zoom in Zoom out