Bespoke moulded emergency overflow
Format: pdf
Bespoke moulded emergency overflow (MWOE)
Before any hot air welding of the emergency overflow, the liner should be pinned and fixed.
Fixings specification engineered for gutter substrate type
| Substrate | Product Code | Pilot hole (if required) | Drill speed |
| STEEL < 3mm | HDS-LS-30 | N/A | 0-2000rpm – Can be full speed |
| STEEL > 3mm | HDS-HS-40 | N/A | 0-2000rpm – Can be full speed |
| CONCRETE | HDS-CON-45 | 5mm Diameter | 0-950rpm – Typically 750Watt |
| ASBESTOS | HDS-ASB-38 | 9.5mm Diameter | Set to lowest speed |
Please refer to the current health & safety guide when drilling holes into asbestos cement and other highly bonded materials.
Unlike other bespoke moulded components, outlets don’t subscribe to the ‘200 rule’ for fixings.
Outlet fixings rules
For outlets with a diameter of up to and including 200mm, four fixings should be used.
And for outlets with a diameter over 200mm, six fixings should be applied.
Order your bespoke moulded emergency overflow
Designed to discharge water in emergencies should outlets become blocked, this item is an important element of many successful Plygene Gutterline installations.
Complete the document attached with your project dimension, job reference and the quantity you require to order yours.
Function: To discharge water in emergencies should outlets become blocked
Type: Datasheets
