Bespoke moulded full side up from the crease of the gutter
Format: pdf
Bespoke moulded full side outlet (MWOS)
Before commencing any hot air welding of the full side outlet, the liner should be pinned and fixed.
Fixings specification engineered for gutter substrate type
| Substrate | Product Code | Pilot hole (if required) | Drill speed |
| STEEL < 3mm | HDS-LS-30 | N/A | 0-2000rpm – Can be full speed |
| STEEL > 3mm | HDS-HS-40 | N/A | 0-2000rpm – Can be full speed |
| CONCRETE | HDS-CON-45 | 5mm Diameter | 0-950rpm – Typically 750Watt |
| ASBESTOS | HDS-ASB-38 | 9.5mm Diameter | Set to lowest speed |
When drilling holes in asbestos cement and other highly bonded materials, please refer to the current health & safety guide.
The ‘200 rule’ for other bespoke moulded components doesn’t apply to the fixings requirements for outlets.
Fixings requirements
For outlets with diameters up to and including 200mm, four fixings should be used, as illustrated.
For outlets with diameters larger than 200mm, six fixings are required.
Order your bespoke moulded side outlet
By enabling effective discharge of water from the side of the gutter this component is an essential part of many Plygene Gutterline installations.
Download and complete the attached PDF and quote the project dimensions and job reference number to order your required quantity.
Function: To discharge water from the side of the gutter
Type: Datasheets
