Bespoke moulded side box c/w outlet
Format: pdf
Bespoke moulded side box c/w outlet (MWOSB)
Before any hot air welding of the full side outlet, the liner should be pinned and fixed.
Fixings specification engineered for gutter substrate type
| Substrate | Product Code | Pilot hole (if required) | Drill speed |
| STEEL < 3mm | HDS-LS-30 | N/A | 0-2000rpm – Can be full speed |
| STEEL > 3mm | HDS-HS-40 | N/A | 0-2000rpm – Can be full speed |
| CONCRETE | HDS-CON-45 | 5mm Diameter | 0-950rpm – Typically 750Watt |
| ASBESTOS | HDS-ASB-38 | 9.5mm Diameter | Set to lowest speed |
Before drilling holes in highly bonded materials such as asbestos cement, please refer to the current health & safety guide.
Unlike other bespoke moulded components, outlets don’t subscribe to the ‘200 rule’ for fixings.
Outlet fixings rules
Four fixings should be used for outlets with a diameter of up to and including 200mm.
For diameters over 200mm, six fixings should be applied.
Order your bespoke moulded side outlet
This component has been designed to discharge water outside the line of the gutter and forms part of many Plygene Gutterline installations.
Complete the attached PDF document with your job reference number, project dimensions and the quantity you require.
Function: To discharge water outside the line of the gutter
Type: Datasheets
